<xmp id="wsmca"><nav id="wsmca"></nav>
<xmp id="wsmca">
  • <menu id="wsmca"><sup id="wsmca"></sup></menu>
    <xmp id="wsmca"><nav id="wsmca"></nav>
  • 您當前的位置 :首頁>>新聞中心>>技術知識

    新聞中心NEWS CENTER

    聯系我們Contact Us

    深圳市特普科電子設備有限公司

    聯系方式:158 1155 1336 (張)

    郵   箱:zyzhang@topsmt.com

    地   址:深圳市寶安區福海街道塘尾社區荔園路142號翰宇灣區創新港4號樓二層

    Placement Modes of Siplace MultiStar (CPP) Placement Head

    2024-02-26
    11141次

     

    Siplace MultiStar (CPP) is the first ever Placement Head that supports both Collect & Place Mode and Pick & Place mode, while being capable of operating in a Mixed Mode that combines both of these two modes in one placement cycle.

    So, what is Collect & Place Mode, Pick & Place Mode, and Mixed Mode exactly?

     

    Collect & Place Mode

    Adopting component camera type 30 (high-resolution camera), Collect & Place Mode of Siplace MultiStar (CPP) is designed for high-speed placement of standard components, whose size ranges from 01005 mm to 27 mm x 27 mm.

    In this mode, Siplace MultiStar collects components while rotating, where every nozzle can be used to collect a small component: The nozzle in the lowest position collects a small component first, after which the CPP Placement Head would quickly rotates to put the available nozzle next to the previous one in the lowest position, and then this now lowest-position nozzle collects another small component. This process can repeat until all 12 nozzles collect the components and move on to place them. The component placing process works in the similar way as collecting process, CPP Placement Head placing while rotating for the next nozzle to the proper placement angle, hence it is also possible to place the small components closely next to each other.

    Here's the graphic demonstration of Siplace MultiStar in Collect & Place Mode:

    CPP Collect & Place Mode.png

     

    Pick & Place Mode

    With component camera type 33 (stationary fine-pitch camera), Pick & Place Mode of Siplace MultiStar (CPP) is designed for the placement of large or special components, whose size ranges from 0402 to 50mm x 40mm (a diagonal of 69 mm is also possible during multiple measurements (e.g. 60 mm x 10 mm)) or certain requirement can only be met by precise placement in a fine pitch field.

    In this mode, CPP Placement Head goes straight down to pick up a large component, goes up, moves to the targeted placement position above, and then goes down in the required placement angle to place the component, while some of the nozzles on the CPP Placement Head cannot be used due to the large space taken up by a large component. Throughout the whole Pick & Place process, the rotation only takes place when Siplace MultiStar is adjusted to a suitable placement angle.

    Here's the graphic demonstration of Siplace MultiStar in Pick & Place Mode:

    CPP Pick & Place Mode.png

     

    Mixed Mode

    Adopting component camera type 30 (high-resolution camera), Mixed Mode of Siplace MultiStar is designed for the placement of components of various types, whose size ranges from 0402 to 50mm x 40mm (a diagonal of 69 mm is also possible during multiple measurements (e.g. 60 mm x 10 mm)).

    In this mode, Siplace MultiStar can operate in the combination of Collect & Place Mode and Pick & Place Mode, which means the CPP placement head can either collect or pick a component, rotate, then move on to collect or pick another component, and can work in a similar way as collecting or picking when placing. When the size of the component is not small enough, there will be nozzles stayed unused as in Pick & Place Mode to make the space for it. If the component is too large, too heavy, or needing special care, the rotation of the Siplace MultiStar will be limited.

    Here's the graphic demonstration of Siplace MultiStar in Mixed Mode:

    CPP Mixed Mode.png

    Which Placement Mode Should Be Adopted?

    Here’s the graphic conclusion of how to choose the placement mode of Siplace MultiStar:

    CPP Different Modes (English).jpg 


    標簽

    聯系我們

    全國服務熱線

    158-1155-1336

    聯系人:張小姐

    郵   箱:zyzhang@topsmt.com

    地   址:深圳市寶安區福海街道塘尾社區荔園路142號翰宇灣區創新港4號樓二層



    亚洲色拍拍噜噜噜最新网站,国产后入清纯学生妹,欧美亚洲国产精品久久高清,女人18毛片A级毛片
    <xmp id="wsmca"><nav id="wsmca"></nav>
    <xmp id="wsmca">
  • <menu id="wsmca"><sup id="wsmca"></sup></menu>
    <xmp id="wsmca"><nav id="wsmca"></nav>